Hydrotech PURA Max and Max Plus Point-of-Use Cooler 1240 Rev Manuel d'utilisateur télécharger pdf (Page 3)

Installation of Quick Connect Pentek Cartridges in the PURA

Max and Max Plus Point-of-Use Cooler

Please verify that all the required items have been received.

The quick connect Pentek Cartridge kit includes the following items.

1. Head, Cartridge, Quick Connect (1) Part # 244426

2. Cartridge, Sediment (1) Part # 25568843

3. Carbon Cartridge c/w Head (1) Part # 158682

4. Tubing, 1/4”,white (10 FT) Part # 115200

Quick Connect Pentek Cartridge Installation Instructions

1. Open the lower door of the cooler as shown in figure 5 below.

2. Insert the ¼” inlet white water tubing inside the cooler through the grommets.

Figure 5

Figure 6

Labeled

“From

Filtration”

¼” Feed

Line Empty

(right port)

Leak

Detector

Labeled “To

Filters”

¼” New

Feed Line

1 2 3 4

Pas de commentaire

Hydrotech PURA Max and Max Plus Point-of-Use Cooler 1240 Rev Manuel d'utilisateur Page 3